Customer needs quotes for 3 parts in qtys of 100 and 50.  This is 1-2 miles of aluminum.  Aerospace company subcontractor that will do the machining.

PN are S3541-1, S3542-1, S3543-1
Material: 2024-T3511 AMS QQ-A-200/3

Cut to 120" lengths.  6063-T6.  Cross sectional area 1.093 sq. in.  Finish clear anodize.  Flatness: 0.006", Straightness: 0.0125 (per length).  Twise 1/4 degree (per length).  Packaging NSM type "13".  Quarterly ordering frequency.  

.080 thickness aluminum (or min thickness per each profile), 65 pieces of each shape as submitted, (30) of each finished 9'3" in length, (35) of each finished 6'3" in length, advise upcharge for 1 color powder coating if available

Customer is a stamping house looking for 10' lengths that they will apply secondary operations to.  Material is 2024 or EAE.  Yearly consumption is 100lbs.  2" circle size press. 

0.0854" cross section 18 ft length with a 8" circle size.  Alloy 6061, but not firm and will consider alternatives.  Customer looking for general pricing and feasibility of 0.854" wall thickness.  18,000" is production demand.  

Extruded aluminum housing.  Roughly 14" x 8" x 9". 6061-T6.  FINISH: ANODIZE PER MIL-A-8625, TYPE III, CLASS 2, DYED BLACK AND SEALED WITH NICKEL ACETATE.
ALL DIMENSIONS APPLY AFTER ANODIZING.

Heavy wall tube 7.75" od x 5.125" id
6061-t6

Extruded structural component.  Approximately 6.3" by 2".  Alloy and finish not specified - verify with customer.  Customer wants quotes asap. 

This part is a component of a consumer product we are designing.  We need to build a prototype so we need between 2 and 10 pieces depending on price.  We also need a quote for orders of 600 and 2000 pieces for our Made in USA product.  6061-T6.  4" circle size.  14" Cut length.  Finish anodizing - check spec with customer.

Quote is for informational purposes only at present time.  6061 Aluminum, no finish specified.  6" circle size.  

6061-T6.  Dims roughly 4" x 4" x 144" with 2.8" torpedo in die.  Part is a motor housing.  No finish specified on drawing.  All quotes please reference: MH-5096-36 REV A

4"x2" .187 thick "T" extrusion cut into 4" lengths.
Normal radius dimensions o.k.  Quote for 200 pcs and 500 pcs.  6063 or EAE

Stock or Custom profile extrusion.  Refrigeration Company needs a 1" thick x 8 to 12 inches wide aluminum extruded hollow plate with 1/8" wall thickness. 3/4" x 3/4" square hole on the plate. 
Vendor Part Number (vpn) 10505-0

Quotes needed ASAP.  Outline provided in Autocad 2000. We can provide step, Solid works, STL, etc.

Critical distances are the inside cavity (page 3 of the drawing shows the two halves connected to form the cavity) and the
mating area for the two halves.

The fin shape and placement have loose tolerances.

Anodized tube approximately: 64mm high x 96 mm wide and 3mm thick cut to 200mm.  Quote with clear anodizing.  Customer is looking for general pricing.  Mates with the two machined end caps in RFQ 678.  Please break out tooling and anodizing charges.